Sea-Doo.net - the official website for the Sea-Doo watercraft enthusiast

LOOKING FOR A PART NUMBER? Save time by using the new BRP Part Catalogs Search

Sea-Doo Part Catalogs

Sport Boats Part Catalogs

ATV Part Catalogs

Thursday, September 09, 2010

Author:	Topic: Releasing Pressure on 2005 GTX Wake
Itsdooable	posted: 7/30/2010 1:00:59 PM glad to help!
jmasterman	posted: 7/29/2010 3:03:29 PM Awesome! Thanks. jmasterman@themastermans.com
Itsdooable	posted: 7/29/2010 2:32:46 PM I can email you a PDF file that show step by step if you want. Need an email address though.
jmasterman	posted: 7/29/2010 12:44:41 PM I'm about to try and replace a fuel level sensor on my 2005 GTX Wake. How do I release the fuel pressure before removing the fuel pump? I don't have a B.U.D.S system to release the fuel pressure, so is there another way to do this safely? The shop manual provides the following: Fuel Pump Open front storage compartment cover. Remove the storage basket (if so equipped). Remove front access panel (see HULL/BODY section). Remove front vent tubes. Remove glove box (see HULL/BODY section). Disconnect electrical connector. Disconnect vent tube from fuel pump. Release the fuel pressure in the system using B.U.D.S. Look in the Activation tab. Disconnect inlet hose from fuel pump. Fromglove box opening, remove fuel pump retaining nuts. 136

Reply to Thread

Topic:	Releasing Pressure on 2005 GTX Wake
Subject:
User Name:		You have not logged in. You will need to type your user information here.
Password:
Enter message below (press return after each line)

want to advertise on the largest seadoo enthusiast site on the web?.. click here

Sea-doo.net is not affiliated with BRP Inc. This is a user supported information and support site for the Sea-Doo Watercraft & Sport Boats products.

SEA-DOO®, SKI-DOO®, ROTAX®, CELEBRITY® are registered
trademarks of Bombardier Inc. and/or its affiliates. GTX is a
trademark of Castrol Limited, used under license.
© 1998 Bombardier Inc. *Trademarks and ® Registered
Trademarks of Bombardier in the U.S. Patent and Trademark Office
and in other countries. All rights reserved.
All posts and emails to Sea-Doo.net become the property of Sea-Doo.net.
Sea-Doo.net is not responsible for inaccurate opinions and advise posted to Sea-Doo.net.