Sea-Doo.net - the official website for the Sea-Doo watercraft enthusiast

LOOKING FOR A PART NUMBER? Save time by using the new BRP Part Catalogs Search

Sea-Doo Part Catalogs

Sport Boats Part Catalogs

ATV Part Catalogs

Thursday, September 09, 2010

Author:	Topic: 2000 rx ignition problem
pwcguy	posted: 7/26/2010 6:05:22 PM Do you have ground to MPEM? Its a ring lug terminal that breaks out midway in harness that is bolted to top left corner of Mag cover. Is connector pluged into Mag cover?
mtackett	posted: 7/20/2010 1:20:33 PM i installed new rebuilt engine in 2000rx that i bought with engine busted. when i went to start for first time i put key in and nothing happened no beeps of any kind. i jumped solinoid and starter did engage and eninge turned over. i checked fuses and checked that i have good voltage to line side of fuses, all checked o.k. what should i look for next. any advise would be great.

Reply to Thread

Topic:	2000 rx ignition problem
Subject:
User Name:		You have not logged in. You will need to type your user information here.
Password:
Enter message below (press return after each line)

want to advertise on the largest seadoo enthusiast site on the web?.. click here

Sea-doo.net is not affiliated with BRP Inc. This is a user supported information and support site for the Sea-Doo Watercraft & Sport Boats products.

SEA-DOO®, SKI-DOO®, ROTAX®, CELEBRITY® are registered
trademarks of Bombardier Inc. and/or its affiliates. GTX is a
trademark of Castrol Limited, used under license.
© 1998 Bombardier Inc. *Trademarks and ® Registered
Trademarks of Bombardier in the U.S. Patent and Trademark Office
and in other countries. All rights reserved.
All posts and emails to Sea-Doo.net become the property of Sea-Doo.net.
Sea-Doo.net is not responsible for inaccurate opinions and advise posted to Sea-Doo.net.